The TWR-KV10Z32 is a development tool for the Freescale Kinetis V series KV1x family built on the ARM® Cortex®-M0+ processor.
The TWR-KV10Z32 MCU module is designed to work either in standalone mode or as part of the Freescale Tower System, a modular development platform that enables rapid prototyping and tool re-use through reconfigurable hardware.
The TWR-KV10Z32 is supported by a range of Freescale and third-party development software.
This hardware can be purchased through Freescale distribution partners.
A Quick Start Guide with step-by-step instructions to configure the hardware, run the out of box demo, use the OpenSDA mass-storage flash programmer to program pre-compiled binaries onto your board, run an IAR Embedded Workbench project and spin the 3-phase BLDC motor of the TWR-MC-LV3PH module, while monitoring the motor with the FreeMASTER tool
OpenSDA Applications for the TWR-KV10Z32
Precompiled demonstration software
IAR Project Labs
Start by following the instructions in the Quick Start Guide and explore the possibilities with your Freescale Tower KV10 development platform.
TWR-KV10Z32 - Quick Start Guide Quick start guide for the TWR-KV10Z32 which is a standalone development kit that can be used in conjunction with the Tower System and the TWR-MC-LV3PH motor control module. Type: Users GuidesFormat: pdfSize: 4258K
TWR-KV10Z32 Quick Start Package TWR-KV10Z32 Quick start package containing precompiled examples, OpenSDA applications and some IAR project labs Type: Operating System SoftwareVendor: FREESCALE
OpenSDA User's guide for the OpenSDA (open-standard serial and debug adapter) embedded on the TWR-KV10Z32 Type: Users GuidesFormat: pdfSize: 936K